15 Karaniwang Problema sa LED Lighting

We prefer LED lighting technology due to its durability, excellent performance, and long lifespan. LEDs operate for roughly 50,000 hours with proper usage. Undoubtedly, LED lights are more cost-effective investments than other types of lighting systems.

Manufactured using environment-friendly materials, LEDs can reduce our carbon footprint. LED lights don’t get damaged more easily than glass bulbs, and they’re not prone to overheating and ensure low energy consumption.

However, LED lights can also cause some trouble. It’s best to fix LED lighting issues immediately to prevent them from getting severe.

Sa post na ito:

• Matututuhan mo ang tungkol sa mga pinakakaraniwang isyu na nauugnay sa LED lighting.

• Magiging pamilyar ka sa ilang napatunayang solusyon upang ayusin ang mga isyung ito.

15 Karamihan sa mga Karaniwang Problema sa LED Lighting

LED lighting, despite its many benefits, comes with its own set of problems.

1. The light Is Disturbingly Bright.

While we like it when the lighting is bright, it could cause discomfort too if it’s too bright. Disturbingly bright light can emerge either by getting more watts than needed or by using a Temperatura ng Kelvin bombilya na nakakairita sa mga mata.

Luckily, you may solve these issues by using a fixture to obstruct extra light. You may also invest in a dimmable bulb and set up a switch to better manage this feature.  

It’s essential to select a fixture with a lower Kelvin temperature rating or one that’s made with a warmer spectrum, as these options can protect your eyes.  

2. Incorrect LED Light Installation

Hindi mo maasahan na gagana ang iyong mga LED na ilaw gaya ng inaasahan kung hindi mo nase-set up ang iyong koneksyon sa lighting system. Ang ilang mga hindi tamang pag-install ng LED lighting ay kinabibilangan ng:

• maling pamamahagi ng liwanag

• nakalantad o maluwag na mga wire na madaling kapitan ng short-circuit

• paulit-ulit na pagkasira

• hindi tamang pamamahagi ng kuryente

To prevent these mishaps from occurring, you need to create a guideline before installing modern LEDs. To ensure an error-free installation process, you must determine the number of fixtures you need to install. Likewise, make sure that your electrical supply can cover for them.  

Carefully study the placement of each fixture to ensure sufficient lighting. You also need to research the correct type of LED required for your preferred setup. Remember that each fixture installed should serve a vital purpose in your entire lighting system.

3. Overheating LED light

Many different factors can bring about LED overheating. But, the most common one is placing them in an environment where they’re not purposely made for. Be reminded that LEDs function better in cooler locations.

When LED lights overheat, they won’t last as long as expected; they won’t illuminate sufficiently and may sooner or later, wear out.

Kaya, ano ang maaari mong gawin upang hindi uminit ang iyong mga LED na ilaw?

• Make sure that you adhere to the manufacturer’s guidelines when installing the light emitting diode fixtures.

• Avoid installing your LED lights in places with very high temperatures. Excessive heat can reduce the functionality and performance of your LEDs. Choose a cooler place if you want them to perform better and last longer.

• Don’t install your LEDs in small and confined environments as these conditions can instantly heat the device. Installing LEDs in open spaces allows them to breathe; this makes overheating unlikely to happen.

• Make sure that the location where you intend to set up your LED lights has excellent ventilation. Good airflow is beneficial for your fixtures as this helps keep the heat from being trapped.

4. Failing to Comply with the Recommended Current or Voltage for Your LEDs

The most crucial factor to consider when using LED light fixtures is the lumen output. It’s vital to convert the wattage into lumens first to opt for the correct lumen rating.

Kailangan mong sumunod sa inirerekumendang LED na kasalukuyang o boltahe dahil ang anumang pagtaas o pagbaba sa kasalukuyang ay maaaring pigilan ang mga fixture na maihatid ang kanilang layunin.

If you supply your LEDs with a lower-than-required current, they won’t emit maximum brightness. Hence, they won’t be able to satisfy your lighting needs. Meanwhile, a higher voltage or current can instantly impair or burn the sensitive components of the LEDs, which may result in an untimely breakdown.

Upang maiwasan ang mga hindi magandang insidenteng ito, ipinapayo namin sa iyo na suriin ang rating ng tagagawa sa mga LED fixture. Maaaring makatulong sa iyo ang diskarteng ito na matukoy kung ang opsyon na bibilhin mo ay tugma sa iyong kasalukuyang setup ng electrical system.

Alternatively, you may consider having your electrical system and wiring customized to make them suitable for your new LED lighting system. We recommend the first option because it’s more economical and less stressful, though.

5. Complex Circuits

Habang ang mabilis na pag-unlad sa teknolohiya ng LED ay may hindi mabilang na mga pakinabang, ang downside na kasama nito ay isang kumplikadong circuit board.

Such intricacy might not be a severe challenge as long as the new light fixture works exceptionally, efficiently, and more economically. Nonetheless, the more complicated the circuitry is the more potential damage.   

Sa pangkalahatan, ang mga karagdagang feature at functionality tulad ng interspersed dimming effect at Wi-Fi connectivity ay ilan sa mga advancement na maaari naming matamasa gamit ang mga kasalukuyang LED lights.

But, despite these convenient and functional add-ons, circuits can still be complicated with emitters, capacitors, drivers, and semikonduktor. These components can make overheating and failure more likely to happen if not correctly managed.  

If you suspect that it is the problem, consider hiring a professional electrician. The electrician can diagnose the problem and come up with a solution.

6. Cheap or Low Quality LED Bulbs

Mangyaring huwag mamili sa mga LED na ilaw na nakakagulat na ibinebenta sa napakababang presyo dahil mas malaki ang posibilidad na mahina ang kalidad ng mga ito. Ang mga mababang kalidad na LED ay mabilis na kumikislap dahil sa kulang na paraan ng paghihinang ng gintong wire na may LED chips.  

The poor soldering technique can cause the innate LED parts to disconnect instantly. Moreover, junky LED bulbs usually have a second-rate Disenyo ng PCB that cannot correctly collect the current. This drawback may cause rapid changes in the LED light bulb’s brightness.

Inirerekomenda namin ang pamumuhunan sa mga premium na LED na ilaw na ginawa ng mga kredible brand upang malutas ang isyung ito. Maaari kang pumili mula sa mga nangungunang tatak ng LED light: Acuity Brands, Cree, Eaton, GE Lighting, at RC Lighting.

Samantala, maaari mong mabilis na matukoy kung ang mga LED ay mura o kalidad. Muli, kung ang presyo ay mukhang masyadong maganda upang maging totoo, huwag maging biktima. Subukang timbangin ang bombilya; kung ito ay mabigat, ito ay maaaring mangahulugan na mayroon itong mas mataas na kalidad na mga bahagi.

Or, check the housing of the LEDs; is it made of solid hard plastic material or aluminyo? What about the voltage and current? Does it follow the recommended rating? Furthermore, check the chip size. Please note that a small chip can produce less light and is more prone to failing.

Gayundin, inspect if the LED bulb’s powder coating or painting is done excellently. If it’s poorly done, you can have a hint that the hidden parts might be below par as well. Sa ilalim ng linya ay ang isang mataas na kalidad na opsyon ay karaniwang nakakakuha ng trabaho. Kaya, siyasatin ang kalidad bago gumawa ng panghuling desisyon sa pagbili.

Ugaliing ihambing ang mga magagamit na LED fixture sa iba pang mga opsyon. Kung ikaw ay mapalad, maaari kang makakuha ng mga diskwento kapag nag-aalok ang mga tagagawa ng mga promo; anyhow, dapat mo pa ring tiyakin na ang kanilang mga alok ay makatwiran at hindi puro pain.

7. Huging Ingay

Ang mga LED na ilaw na gumagawa ng buzzing noise ay walang alinlangan na nakakagambala, lalo na kung ikaw ay isang light sleeper o sensitibo sa mga tunog na nauugnay doon. Ang ganitong ingay ay maaaring isang indikasyon na na-overload mo ang circuit.

How does this happen? Let’s say the dimmer can merely accommodate 400-watt LED lights, but if you attach more than a 300-watt lighting system, a buzzing noise will likely emerge.

The noise will originate from the electronic parts’ resonance inside the light, which resonates in a particular frequency like 100 to 120Hz. When the LED lights produce a noise, something is wrong.

So, once you experience this, it’s crucial to check the light and the circuitry at once to avoid worsening the problem. Additionally, try to detach some of the lights to make a quick inspection to solve this issue.

8. Outmoded/ incompatible Fixtures or Dimmers

Sa napakalaking pag-unlad sa industriya ng LED, ang mga lumang dimming circuit ay naging hindi tugma sa mga LED. Maaaring may maraming dahilan para dito; ang fixture ay maaaring hindi para sa dimmable LED bulbs, o ang bulb ay hindi dimmable.

Sa kabilang banda, ang ilang karaniwang isyu na lumalabas dahil sa hindi tugma o luma na mga dimmer ay drop-out, pagkutitap, at hindi gaanong maayos na pag-iilaw.

Maaga o huli, ang mga LED ay nasira at hindi gumagana dahil sa pabagu-bagong kapangyarihan at boltahe at hindi tugmang dimmer. Bago lumala ang sitwasyon, payagan ang isang kwalipikadong electrician na siyasatin ito.

Please take in mind that before buying LEDs, it’s critical to inspect whether each LED type is adaptable with each dimmer type. Please be cautious when searching for a dimmer and choose the one recommended by your fixture’s manufacturer.

9. Loose LED light Bulbs

Ang mga maluwag na LED na bombilya ay karaniwang nagdudulot ng mga isyu sa pagkutitap, kaya siguraduhing ligtas mong i-install ang mga ito sa kabit. Upang maiwasang masira ang kasalukuyang transmission, kailangan mong higpitan nang ligtas ang LED bulb sa base.

Safety should be your priority. To prevent electrical shock, you must turn off the power supply and the bulbs before examining the LEDs. You can enjoy sufficient illumination in dark places by placing handy work lights beneath the fixture.   

10. LED light Burning out Quickly

Cheap and low-quality LED lights sold without warranties are often the root of burning-out problems in LEDs.

The good news is that this issue need not bring you more stress because you can always replace it with a high-quality one. Like buying other products, don’t fall for fraudulent offers; stick to credible brands that offer a warranty.

Maaaring protektahan ng mga warranty ng produkto ang iyong pagbili, at maaari mong palaging matugunan at malutas ang iyong mga isyu tungkol sa depekto ng produkto.

11. Using Inappropriate LED Drivers

Ang bawat LED na ilaw ay nilagyan ng mga driver. Ang driver ay sadyang para sa pamamahagi ng kapangyarihan at para sa aparato upang gumana nang naaangkop.

Ngunit, magkakaroon ka ng problema kung ang iyong LED ay hindi tugma sa driver. Ang mga potensyal na isyu na maaari mong makaharap ay kinabibilangan ng pagsunog sa driver o hindi gumaganang mga LED dahil sa sobrang init.

Sabi nga, mahalagang suriin ang Mga driver ng LED first so that you can choose the one that’s compatible with your LED lighting.

We strongly suggest running your LED by using low voltage DC drivers for these units are famous for their dependability and efficiency. Low voltage DC drivers convert AC and produce a steady current to keep your LEDs intact.  

Did you know that it’s common for LEDs to have issues with the circuit that cause the drivers to overheat and malfunction?

Ang mababang kalidad na LED ay maaaring magpapasok ng sapat na kapangyarihan; sa downside, maaari itong makabuo ng labis na init. Sa kabutihang palad, ang mga kilalang tatak sa ngayon ay gumagawa ng mga matibay na driver na tumutugma sa habang-buhay ng LED.

Inirerekumenda namin na suriin ang sheet ng mga detalye ng opsyon na iyong binibili upang suriin kung tama ang iyong nakukuha.

12. LED Strip Displaying the Wrong Color

Ang pagpapaandar ng RGB LED strips ay upang ipakita ang iba't ibang kulay. Magkagayunman, kung mapapansin mo na ito ay nagpapakita ng mga maling kulay, ito ay nagpapahiwatig na may isang bagay na naka-off.

Karaniwang nangyayari ang kundisyong ito kapag may problema sa mga koneksyon sa wire. O, maaaring may mali sa LED Controller. Gayunpaman at lahat, maaari mong suriin ang mga kable at gawin ang ilang mga kapalit kung kinakailangan.

Samantala, maaari mo ring makita ang video na ito tungkol sa pag-aayos ng mga nasirang LED strip na ilaw na sulit na panoorin:

13. Paggamit ng mga LED na may Iba Pang Uri ng Teknolohiya sa Pag-iilaw

Many of us are tempted to use our outdated lighting setups with our new lighting setups because we mistakenly think doing so will help us save more. Little did we know that this misleading technique can have ill effects on our modern LED light fixtures.

Why shouldn’t we use LEDs with other illumination setups? The truth is, that most traditional lighting technologies are usually not entirely efficient. For instance, traditional incandescent light bulbs are more susceptible to overheating due to their deficient heat dissipation ability.

Kung ikukumpara sa mga fluorescent na bombilya at incandescent na bombilya, ang mga LED ay malamang na gumana nang mas mahusay sa mas malalamig na mga lugar, kaya naman hindi mo dapat i-install ang mga ito sa mga lokasyong may mataas na temperatura.

Kaya, hindi isang matalinong ideya ang paggamit ng mga LED sa parehong lugar tulad ng mga bombilya na lumilikha ng init o fluorescent na bombilya.

In general, the heat will begin to build up surrounding your fixture, and with improper ventilation, heat dissipation, and airflow, your LEDs may begin to break down. If this condition arises, you need to prepare yourself to deal with burns, damaged wires, smoke, fires, and permanent damage to your fixture.

Tandaan na ang mga tradisyunal na fixtures tulad ng fluorescent at incandescent na mga bombilya ay malinaw na nagpapalabas ng init kaysa sa mga pinakabagong LED na ilaw ngayon.

So, if you use these technologies altogether, there will be incompatibilities, leading to overheating issues. The effect will be losing or permanently damaging all your fixtures.

Then, what should you do? It’s simple; avoid mixing your outdated illumination methods with your modern LED setups.

14. Excessively Dim LED Light

Much as we get irked by too bright LED light, a too dim LED light won’t do us any good. This condition usually occurs either when the LED is poorly manufactured or when it’s already overused.

Bagama't totoo na ang mga LED ay pangmatagalan, tulad ng lahat ng bagay sa buhay, hindi sila tatagal magpakailanman. Kaya, huwag asahan na sila ay magliliwanag nang maliwanag nang permanente. Natural lang para sa mga LED na mawalan ng liwanag kapag malapit na itong mawala.

Sa sitwasyong ito, ang tanging bagay na maaari mong gawin ay bumili ng bagong kapalit na LED.

15. LED Light Lures Bugs or Insects

Traditional lighting methods are more prone to attracting insects or bugs than LEDs, but this doesn’t mean that LEDs won’t lure insects at all. Some light systems lure insects or bugs more because of the wavelengths of light they produce and their heat.

Generally speaking, bugs are lured to the light they can see, and they’re solely lured to specific types of wavelengths. Insects or bugs are commonly lured to shorter wavelengths, approximately 400 to 600 nm.

According to some research, warm-colored LED bulbs are better alternatives if you wish to eliminate insects or bugs roaming around your lights. LEDs with a warm orange or yellow touch have longer wavelengths than other colors.

Konklusyon

Ultimately, you have learned that LED lighting methods are better options than traditional lighting technologies like fluorescent and incandescent bulbs. They operate more efficiently, last longer, are energy-saving, and are not prone to overheating if appropriately used.

Not to mention, most LEDs are safe to use, and the latest designs come with unique and functional features that make them more worthwhile investments. Like what’s mentioned above, there are some common problems with LED lighting that we need to watch out for.

Sana, ang mga isyu na aming tinalakay at ang mga solusyon na aming inaalok ay makakatulong sa iyo na matugunan at malutas ang anumang mga alalahanin na mayroon ka sa iyong mga LED lighting system.

Piliin RC Lighting for Reliable LED Solutions

Facing challenges with your current LED lighting? Switch to a brighter, more reliable solution with RC Lighting.

Our extensive range of high-quality LED lights is designed to address and resolve the 15 most common problems associated with LED lighting. From flickering to longevity, we ensure each product delivers exceptional performance and durability. Don’t compromise on the quality of your illumination.

Makipag-ugnayan sa amin today to explore our LED solutions and light up your space with confidence and ease.